Using the Node Management Services (NMS) Utilities (32022-90053)

Appendix A 273
NMS Error Messages
NMMGRVER Messages, Errors and Warnings
MESSAGE:
Unable to purge data.
Path: !
Midasstat = !
(NMMGRVERERR 63)
NMMGRVERERR
63
CAUSE: Internal error occurred while purging data at displayed path.
ACTION: Restore a backup copy of the configuration file if possible and
run NMMGRVER again. If the error still occurs, submit a Service
Request. See “Submitting an SR” at the beginning of this appendix.
Note: not user solvable. A qualified HP representative should check the
midasstat value to determine what the problem is and take appropriate
action.
MESSAGE:
Unable to get son path.
Path: !
Midasstat = !
(NMMGRVERERR 64)
NMMGRVERERR
64
CAUSE: Internal error, could not get the son of the displayed path.
ACTION: Restore a backup copy of the configuration file if possible and
run NMMGRVER again. If the error still occurs, submit a Service
Request. See “Submitting an SR” at the beginning of this appendix.
Note: not user solvable. A qualified HP representative should check the
midasstat value to determine what the problem is and take appropriate
action.
MESSAGE:
Unable to get data.
Path: !
Midasstat = !
(NMMGRVERERR 65)
NMMGRVERERR
65
CAUSE: Internal error occurred while attempting to get data from the
displayed path.
ACTION: Restore a backup copy of the configuration file if possible and
run NMMGRVER again. If the error still occurs, submit a Service
Request. See “Submitting an SR” at the beginning of this appendix.
Note: not user solvable. A qualified HP representative should check the
midasstat value to determine what the problem is and take appropriate
action.
MESSAGE:
Unable to get brother path.
Path: !
Midasstat = !
(NMMGRVERERR 66)
NMMGRVERERR
66
CAUSE: Internal problem accessing path in the configuration file.
Brother of displayed path could not be obtained.