Using the Node Management Services (NMS) Utilities (32022-90053)

Appendix A 271
NMS Error Messages
NMMGRVER Messages, Errors and Warnings
ACTION: Correct the file system error and run NMMGRVER again.
MESSAGE: FCLOSE FSERR ! on NMMGRCAT.PUB.SYS.
(NMMGRVERERR 25)
NMMGRVERERR
25
CAUSE: Returned by NMCPRINTERRMSG after printing a message
from NMMGRCAT.PUB.SYS. The FCLOSE of NMMGRCAT.PUB.SYS failed.
ACTION: Correct the file system error and run NMMGRVER again.
MESSAGE: Merge failed. Error in NMCONFIG.PUB.SYS
(NMMGRVERR 26)
NMMGRVERERR
26
CAUSE: During the merge of NMCONFIG and the file to be converted,
an error was found in one of the paths in NMCONFIG.
ACTION: The configuration file may have been changed. Restore a
backup copy of the configuration file if possible and run NMMGRVER
again. If the error still occurs, submit a Service Request. See
“Submitting an SR” at the beginning of this appendix.
CAUSE: The file NMCONFIG.PUB.SYS is not valid.
ACTION: The configuration file may be corrupted. Restore a backup
copy of the configuration file if possible and run NMMGRVER again. If
the error still occurs, submit a Service Request. See “Submitting an SR”
at the beginning of this appendix
CAUSE: Depth of paths exceed max_path_depth.
ACTION: The configuration file may be corrupted. Restore a backup
copy of the configuration file if possible and run NMMGRVER again. If
the error still occurs, submit a Service Request. See “Submitting an SR”
at the beginning of this appendix.
MESSAGE: File full; no conversion done. (NMMGRVERWARN 27)
NMMGRVER
WARN 27
CAUSE: The configuration file to be converted is full. There must be at
least two (and possibly more than two) records available in the
configuration file to do a conversion.
ACTION: Go to the Compress utility screen in NMMGR and expand
the file.
MESSAGE: Cannot copy configuration file to NMTEMP; no conversion
done. (NMMGRVERR 40)
NMMGRVERERR
40
CAUSE: The configuration file could not be copied to NMTEMPa.
ACTION: Check if there is any disk space left on LDEV 1.
MESSAGE: Could not rename config file; no conversion done.
(NMMGRVERR 41)
NMMGRVERERR
41
CAUSE: Could not rename or copy the configuration file to NMMGBAK,
or could not rename or copy NMMGRTMP to the configuration file.
ACTION: Check if there is any disc space left on LDEV 1.