Using the Node Management Services (NMS) Utilities (32022-90053)

Appendix A 269
NMS Error Messages
NMMGRVER Messages, Errors and Warnings
MESSAGE:
Invalid data length.
Path: !
Length: !
(NMMGRVERERR 15)
NMMGRVERERR
15
CAUSE: The length of the data array which was read from the cell was
incorrect. This could indicate that an incorrect cell was accessed or that
the user is trying to convert an invalid configuration file. The cell is not
converted.
ACTION: Verify that the original file was a valid version. Using
another tool, examine the cell data and verify the data. Since the cell
was not touched, the data may have to be entered manually.
MESSAGE:
Conversion failure.
PATH: !
MIDASSTAT: !
(NMMGRVERERR 16)
NMMGRVERERR
16
CAUSE: This is a generic message which allows the path name and
status to be output.
ACTION: Depends on status and user needs.
MESSAGE:
Path not allowed for this version. Path purged.
Path: !
(NMMGRVERERR 17)
NMMGRVERERR
17
CAUSE: Certain paths are not supported on the current version of the
configuration file, even though they were supported on previous
versions.
ACTION: None necessary. You may want to verify which paths have
been deleted.
MESSAGE: File type has not been defined. (NMMGRVERERR 18)
NMMGRVERERR
18
CAUSE: Internal error. User entered valid data but it somehow has
been corrupted. The type of the file passed to NMMGRVER is not
within the valid range of: 1= MPE V NSCONF type; 2= MPE V
NMCONF type.
ACTION: Run NMMGRVER again. If the error still occurs, submit a
Service Request. See “Submitting an SR” at the beginning of this
appendix.
MESSAGE: Unable to create LINK subtree (NMMGRERR 19)
NMMGRVER
ERR 19
CAUSE: You specified that the configuration file was an MPE V file.
Therefore, NMMGRVER checked to make sure the LINK subtree did
not exist. Since it did not exist, NM tried to create it because iX