Using the Node Management Services (NMS) Utilities (32022-90053)

Appendix A 265
NMS Error Messages
NMMGRVER Messages, Errors and Warnings
NMMGRVER Messages, Errors and
Warnings
The following messages may be returned from the NMMGRVER utility
(n represents the message number). Note that NMMGRVER may also
provide you with messages which tell you that the operation has
completed successfully.
(NMMGRVERWARN n) messages are displayed when conversion failed and
the file is not changed.
(NMMGRVERERR n) messages are displayed when conversion has failed
and the file may be changed. These warning messages are listed and
described together at the end of the following error messages.
MESSAGE: CONVERSION completed successfully.
(NMMGRVERMSG 0)
NMMGRVERMSG
0
CAUSE: Successful completion.
ACTION: None.
MESSAGE: NO NEED TO CONVERT. (NMMGRVERMSG 1)
NMMGRVERMSG
1
CAUSE: Configuration file version is correct; file does not require
conversion.
ACTION: None.
MESSAGE: OPEN FILE ERROR: Cannot convert file.
(NMMGRVERWARN 2)
NMMGRVER
WARN 2
CAUSE: NMMGRVER was unable to open the configuration file during
conversion. More than one user is accessing the file.
ACTION: Execute the LISTDIR5 subsystem and type LISTF to check
whether other users are accessing or storing this file. NMMGERVER
needs exclusive access to the configuration file. Run NMMGRVER when
file is freed.
CAUSE: Internal file system unable to LOCK and OPEN the file with
write access due to file system security.
ACTION: Resolve the MPE security restriction and retry. Run
LISTDIR5 and type LISTSEC configFileName to determine the security
restrictions of the file.
CAUSE: Internal file system unable to OPEN the file if incorrect
LOCKWORD was provided.
ACTION: Rerun NMMGRVER with correct LOCKWORD.
CAUSE: Another internal error has occurred when opening the file.