Using the Node Management Services (NMS) Utilities (32022-90053)

232 AppendixA
NMS Error Messages
NMGR Error and Warning Messages
MESSAGE: IP Address with node portion of zero’s reserved.
(NMGRERR 134)
NMGRERR 134 CAUSE: The node portion of the IP address is all zeros.
ACTION: Check the IP address and make sure that the node portion is
not all zeros. Enter a valid IP address. (Press the Help key for more
information on entering a valid IP address.)
MESSAGE: IP Address with network portion of zero’s reserved.
(NMGRERR 135)
NMGRERR 135 CAUSE: The network portion of the IP address is all zeros.
ACTION: Check the IP address and make sure that the network portion
is not all zeros. Enter a valid IP address. (Press the Help key for more
information on entering a valid IP address.)
MESSAGE: IP Address A 127 XXX.XXX.XXX is reserved for Loopback.
(NMGRERR 136)
NMGRERR 136 CAUSE: The IP address entered has a network address of 127. This
network address with any node address is reserved for loopback.
ACTION: Check the IP address and make sure that the network
address is not 127. Enter a valid IP address. (Press the Help key for
more information on entering a valid IP address.)
MESSAGE: IP Address E 255.255.255.255 is reserved for Broadcast.
(NMGRERR 137)
NMGRERR 137 CAUSE: The IP address the user entered is a reserved address.
ACTION: Enter a different IP address. (Press the Help key for more
information on entering a valid IP address.)
MESSAGE: Bad LAN address. Format is xx-xx-xx-xx-xx-xx; x is 0–9 or
A–F. (NMGRERR 138)
NMGRERR 138 CAUSE: The user entered an invalid LAN address on a screen or in a
maintenance mode command.
ACTION: Correct the LAN address and repeat the last command or
action. (Press the Help key for more information on entering a valid
LAN address.)
MESSAGE: Invalid response. you must enter ON or OFF.
(NMGRERR 139)
NMGRERR 139 CAUSE: The user, while using the DTSDYNCONF command in maint
mode, they entered in invalid char. The only valid response is either ON
or OFF.
ACTION: Enter either ON or OFF.