Using the Node Management Services (NMS) Utilities (32022-90053)

230 AppendixA
NMS Error Messages
NMGR Error and Warning Messages
MESSAGE: LU Number “!” on page ! is a duplicate. (NMGRERR 119)
NMGRERR 119 CAUSE: You have entered two LUs with the same LU name. These
names may be on the same page (1 or 2) of LU data, or one name may
be on page 1 and the other on page 2.
ACTION: Make sure all LUs have unique names.
MESSAGE: If the Node Type is “2.0”, then the LU # is required.
(NMGRERR 120)
NMGRERR 120 CAUSE: The user entered an LU Number out of the acceptable range of
1–255.
ACTION: Enter an LU Number that is in the range 1–255.
MESSAGE: IP Address with node portion of zeros is reserved for
broadcast. (NMGRERR 121)
NMGRERR 121 CAUSE: You entered an IP address with the node portion of the IP
address equal to zero.
ACTION: Modify the node portion of the IP address to a valid IP
address.
MESSAGE: LU Name must be a letter followed by letters for digits.
(NMGRERR 122)
NMGRERR 122 CAUSE: The user entered a string that contained some non
alpha-numeric characters.
ACTION: Re-enter the string with alpha-numeric characters only.
MESSAGE: IP Mask can only contain digits separated by periods or
spaces. (NMGRERR 123)
NMGRERR 123 CAUSE: The IP mask wasentered incorrectly. Each octet (XXX) can only
contain digits. The octets can be separated by periods or blank spaces.
ACTION: Enter a mask in the correct format.
MESSAGE: IP Mask octets can only contain values between 0 and
255. (NMGRERR 124)
NMGRERR 124 CAUSE: One or more of the octets entered in the IP mask contains a
number less than 0 or greater than 255.
ACTION: Enter a mask with octets within the range 0 to 255.
MESSAGE: IP Mask must contain exactly four octets. (NMGRERR 125)
NMGRERR 125 CAUSE: More or less than four octets (XXX) were entered.
ACTION: Re-enter the mask with exactly four octets.