Using the Node Management Services (NMS) Utilities (32022-90053)
220 AppendixA
NMS Error Messages
NMGR Error and Warning Messages
ACTION: Submit a Service Request. See “Submitting an SR” at the
beginning of this appendix.
MESSAGE: Internal error: The root node has parent node.
(NMGRERR 49)
NMGRERR 49 CAUSE: This is an NMMGR internal error. NMMGR is scanning the
configuration file off the boundary.
ACTION: Submit a Service Request. See “Submitting an SR” at the
beginning of this appendix.
MESSAGE: Internal error: The schema has an invalid format.
(NMGRERR 50)
NMGRERR 50 CAUSE: This is an internal NMMGR error. NMMGR cannot locate a
node in an internal table describing the configuration file structure.
ACTION: Submit a Service Request. See “Submitting an SR” at the
beginning of this appendix.
MESSAGE: No screen for this path. (NMGRERR 51)
NMGRERR 51 CAUSE: There is no screen to display that is associated with this path
name. A path exists in the configuration file but is not recognized by
NMMGR.
ACTION: This path is for internal use only. Check the pathname and
try again.
MESSAGE: Internal error: Cannot create version stamps.
(NMGRERR 52)
NMGRERR 52 CAUSE: NMMGR creates version stamps for each subsystem in
configuration file at file creation time, and in some cases at file open
time. This is an internal NMMGR error. NMMGR cannot create version
stamps in the configuration file due to an NMCONF error. Check the
NMCONF error number for detail.
ACTION: Purge this new file and try to recreate it. If an error still
occurs, see “Submitting an SR” at the beginning of this appendix.
MESSAGE: Version mismatch found on specified subsystem. Please
run NMMGRVER. (NMGRERR 53)
NMGRERR 53 CAUSE: NMMGR checks version stamps of each subsystem in the
configuration file at file open time. Version checking results show that
there is configuration data for at least one subsystem in the
configuration file that is not supported by this version of NMMGR.
ACTION: Run the version control program NMMGRVER to update the
file, or open another file, or create a new file.