Using the Node Management Services (NMS) Utilities (32022-90053)

218 AppendixA
NMS Error Messages
NMGR Error and Warning Messages
MESSAGE: Invalid syntax for file name. (NMGRERR 36)
NMGRERR 36 CAUSE: The user attempted to OPEN or CREATE a configuration file
with an invalid file name.
ACTION: Check the spelling and syntax of the file name.
MESSAGE: ENTER executes commands: the command field is blank.
(NMGRERR 37)
NMGRERR 37 CAUSE: The user pressed
[ENTER] without putting a command in the
command window. NMMGR uses
[ENTER] ONLY for commands.
Modifications to the configuration file are all made using function keys.
ACTION: Make modifications to the configuration file by using the
function keys.
MESSAGE: MPE command warning. (NMGRERR 38)
NMGRERR 38 CAUSE: The user executed an MPE command (by entering the
command preceded by a colon and pressing ENTER), and the command
terminated in a warning state.
ACTION: Use the Error Information screen and check the Command
Interpreter error for further information.
MESSAGE: Unable to set termination trap handler. (NMGRERR 39)
NMGRERR 39 CAUSE: The termination trap handling procedure for program aborts
cannot be set. This error indicates an internal MPE problem in the
procedure XDSNTRAP, which places a termination procedure PLABEL
in the process context for use by MPE during process termination.
ACTION: Check the MPE installation to see that XDSNTRAP is present
and working.
MESSAGE: Must open a file before using this command.
(NMGRERR 40)
NMGRERR 40 CAUSE: The user is trying to view a configuration screen without first
opening a configuration file.
ACTION: Open the configuration file and enter the command again.
MESSAGE: Internal error: Unexpected screen length. (NMGRERR 41)
NMGRERR 41 CAUSE: The configuration file is corrupted.
ACTION: Restore a backup copy of the configuration file if possible and
run NMMGRVER again. If the error still occurs, submit a Service
Request. See “Submitting an SR” at the beginning of this appendix.
CAUSE: The forms file is corrupted or is a bad version.
ACTION: See “Invalid Software Installation” at the beginning of this
appendix.