Using the Node Management Services (NMS) Utilities (32022-90053)

192 AppendixA
NMS Error Messages
NM Error Messages
MESSAGE: Parameter not aligned properly. (NMERR 88)
NMERR 88 CAUSE: Internal error by the calling subsystem.
ACTION: See “Submitting an SR” at the beginning of this appendix.
MESSAGE: Invalid path type value, must be 1 or 2. (NMERR 90)
NMERR 90 CAUSE: Returned by NMCONFNEXTPATH. NMCONFNEXTPATH
detected invalid path type value. Internal error by the calling
subsystem.
ACTION: See “Submitting an SR” at the beginning of this appendix.
MESSAGE: Unable to purge datafile. (NMERR 92)
NMERR 92 CAUSE: Returned by NMCONFPURGE NMOPENTRACE. File system
error.
ACTION: Try to purge the file from a CI session, and note the error.
Correct this and retry.
MESSAGE: No identifiers beyond this point in datafile. (NMERR 94)
NMERR 94 CAUSE: Returned by NMCONFNEXTPATH. NMFILE detected
warning NMFSWARN 23, in MIDASNEXTPATH. This may not be an
error if the caller’s intention is to search the data file. Otherwise it
might indicate corruption of the file.
ACTION: If file corruption is suspected, see “Corrupt Configuration
File” at the beginning of this appendix. If this is not a problem, it may
be due to incompatible software modules, or an internal error by the
calling subsystem. See “Version Incompatibilities” and “Submitting an
SR” at the beginning of this appendix.
MESSAGE: Read truncated to capacity of buffer. (NMERR 95)
NMERR 95 CAUSE: Returned by NMCONFGETDATA. NMFILE detected
NMFWARN 19 on MIDASGETDATA. This isprobably an internal error
by the calling subsystem.
ACTION: See “Submitting an SR” at the beginning of this appendix.
MESSAGE: File code mismatch. (NMERR 96)
NMERR 96 CAUSE: Returned by NMCONFOPEN. NMFILE detected
NMFSWARN 6 on MIDASOPEN. The file is not a valid configuration
file.
ACTION: Type LISTF <filename>, 1 on the file. The file type should be
type NCONF.
CAUSE: Internal error.
ACTION: See “Submitting an SR” at the beginning of this appendix.