Using the Node Management Services (NMS) Utilities (32022-90053)

Appendix A 169
NMS Error Messages
NMCN Error and Warning Messages
ACTION: See “Insufficient MPE Resources” at the beginning of this
appendix.
MESSAGE: NM Log Process: Cannot format log msg. Cannot access
formatter for subsystem !. Encountered LOADPROC error !.
(NMCNERR 45)
NMCNERR 45 CAUSE: A request to write a formatted log message specifies an NMS
subsystem number where formatter Log Process was unable to
LOADPROC.
ACTION: The SUBSYSnLOGFORMA procedure, where n is the subsystem
number specified in the message, either did not exist in SL.PUB.SYS or
could not be loaded when NM Log Process started. Look up the
LOADPROC error number in the MPE Intrinsics Reference Manual.
Correct this error. Check that NMS subsystem n is completely, correctly
installed. See “Invalid Software Installation” and “Insufficient MPE
Resources” at the beginning of this appendix.
Table A-1 Subsystem Numbers for NMCNERR Messages
MESSAGE: NM Log Process: Cannot format log msg. Unknown
subsystem nn. (NMCNERR 46)
NMCNERR 46 CAUSE: A request to write a formatted log message specifies an
unknown NMS subsystem number.
ACTION: This is an internal error. See “Submitting an SR” at the
beginning of this appendix.
nn Subsystem
0
Node Management Services (30299-11017)
1
SNA Transport (32099-11015)
2
SNA/NRJE (Product #30245)
3
Network Transport (Product #30242)
4
Port Translator (30299-11017)
5
Sockets
6
Network Services (Product #32344)
7
Buffer Manager (30299-11016)
8
Link Manager (part of Node Management Services)
9
Reserved for future use
10
Reserved for future use
11
SNA/IMF
12/15
Reserved for future use