Using the Node Management Services (NMS) Utilities (32022-90053)

Chapter 7 149
NMDUMP
Formatting Options
SDLC, LAP-B,
RJE/BSC 802.3,
802.5, FDDI,
100VG-AnyLAN,
100Base-T
1 Output Limit Allow input of maximum bytes in
line-data frames to reduce the amount
of formatted data. Affects only
line-data-frames.
2 Filter Sets Allows selection of filters for output
data. All filter sets are displayed when
selected.
3 Show Raw Data Allows printing of unformatted trace
data along with the same data in
decoded form. Default = YES.
4 Show Decoded Data Used with option 3, willdisable printing
of decoded data. (Prints only raw data.)
Default = YES.
LAP-B, SDLC 7 Data Representation Tells formatter what type of bit
encoding is used. (ASCII or EBCDIC)
LAP-B Only 8 MODOLO Count Tells formatter whether frame data in
trace file was a modolo-128 format
rather than default modolo-8 format.
802.3, 802.5 5 Select Linknames
FDDI,
100VG-AnyLAN,
100Base-T
6 Exclude Linknames
7 Select Character
Representation
Toggle between ASCII and EBCDIC
representation.
802.3, 802.5,
FDDI
9 Filter ON Station
Address
Select MAC or station address for
filtering Source and Destination.
10 Filter ON SAP Select filtering for both SSAP and
BSAP.
11 Generate HP-UX
Trace Site
Create trace output file or format, that
8.0 HP-UX formatter can use.
100VG-AnyLAN,
100Base-T
8 Filter ON Station
Address
Select MAC or station address for
filtering Source and Destination.
9 Filter ON SAP Select filtering for both SSAP and
BSAP.
Subsystem Option Meaning Description