Using the Node Management Services (NMS) Utilities (32022-90053)

Chapter 7 147
NMDUMP
Formatting Options
See Table 7-3 for information on the trace formatter options.
Table 7-3 X.25 Trace Formatter
Options Actual Settings
0 – Set Default Values
3 – Display Mode Terse or Lab
4 – Layer Level2_3 or Level 2 or Level 3
5 – Dump Packet No or Yes
Level 2:
6 – Full or Header Header Only or Full Packet with Data
8 – Packet Type All, or Select Combination of 9 Level or Packet
Types
Level 3:
9 – Full or Header Header or Full Packet with Data
10 – Display Length Amount of Data to Display
11 – Q bit Both, or Value of Q-bit 0, 1, or Both
12 – VC Number All, or Select Virtual Circuit Number
13 – Packet Type All, o Select From 17 Level 3 Packet Types in
any Combination
Enter the number or <CR> to select the current option: packet types in any combination.