Using the Node Management Services (NMS) Utilities (32022-90053)

Chapter 5 115

Using NMMGR in Maintenance Mode

PATHCONF

Sets the current path in the current conﬁguration ﬁle.

Syntax

PATHCONF[=]path

Parameters

path The name of a path in the conﬁguration ﬁle that

describes the location of the desired record. It is

composed of one to eight path identiﬁers separated by

periods:

pathid.pathid.pathid...

The last identiﬁer in the path must be a data identiﬁer

(must refer to a data screen).

Description

PATHCONF sets the current path in the conﬁguration ﬁle; that is, it

points to the speciﬁed conﬁguration record. The current data in the

current path is operated on by the READCONF, READALLCONF,

WRITECONF, and UPDATECONF commands. You must call the

VERSIONCONF command before using this command. The

VERSIONCONF command needs to be called only once in a session.

Example

To set the current path in the conﬁguration ﬁle to

NETXPORT.NI.niname where niname=LANNI:

NMMGR> PATHCONF NETXPORT.NI.LANNI