UPS Utility Manual

3.1 HELP Command
The HELP command merely displays a "menu" of UPSUTIL commands, as an online documentation aid to users of
UPSUTIL.
Syntax
help
Example
--------------------------------------------------------------------------
UPSUTIL: Command > help
--------------------------------------------------------------------------
UPSUTIL Program: Commands available are as follows:
(There are no parameters for any of the commands.
At the prompt, just type the command name.
)
Cmd Name: Command Function:
~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
help - Show this menu of commands.
exit - Done, exit the program.
config - Show system configuration of UPS devices.
newconfig - Change to a new UPS Monitor config file.
start - Start the System UPS Monitor process.
stop - Stop the System UPS Monitor process.
restart - Restart (stop, then start) the UPS Monitor process.
resetpfail - Reset (clear) UPS Monitor's information about the
most recent execution of the "powerfail command file".
status - Show System UPS Monitor process status.
------------------------------------------------------------------------------
UPSUTIL: Command >
Page
13
of
48
UPS Utility
7/18/2008
http://jazz.external.hp.com/papers/upsutil.htm