SNA NRJE User/Programmer Reference Manual (30292-90006)

60 Chapter3
User Commands
ALTER
Example
RMT53>...
You have entered NRJE for RMT53.<F255P255D>
RMT53>DISPLAY;QUEUE
Use this command to obtain the value of Reader fence.
Workstation: R53
READER QUEUE
Reader ldev: 12
Chain size: 99
Number of readers: 1
Compression: YES
Translation code: 0: Native-3000
Reader status: UP
Reader fence: 6
System fence: 6
RMT53>SHOW @
It is useful to see the priorities of your jobs.
If you are logged on as KEN.NRJE, you would see
this display.
#O Name Pri State Rank Size User.Account Time
1069 13 READY 3 32 KEN.NRJE 10:48
RMT53>ALTER 1069,4
You changed the priority of SpoolfileID 1069 to 4.
You deferred transmission of this file because
Newpri is below the reader fence value.
RMT53>...
Other commands follow
In the example, you changed the priority of one file to a Newpri value.
You can change the priority of groups of files to a
Newpri value when
you use the
Name, UserName.AcctName , or @ parameter. This is useful
when you advance a priority value above the deferred value set by
RDRFENCE.
Text Reference
The intrinsic related to this command is NRJEAlter, which is described
in Chapter 5 , “User Intrinsics.”.