SNA NRJE Node Managers Guide (30292-90007)

48 Chapter3

SNA NRJE Conﬁguration

Conﬁguring SNA NRJE

Writer List Screen

Once you have conﬁgured the workstation’s virtual reader, you should

conﬁgure the virtual writers. You do this on the NRJE Conﬁguration:

Writer List Screen, as shown in Figure 3-8. Select this screen by

pressing

[f3] (Go To WRITER) on the NRJE Conﬁguration: Workstation

Data screen. (You can go directly to this screen from any screen by

typing @NRJE.

wsid

.WRITER in the command window and pressing

[ENTER].) You must conﬁgure an NRJE writer for each printer or punch

deﬁned at the host. The writers are spooled devices; they act as logical

printers and punches and receive output data sets from the host. You

must conﬁgure at least one writer per workstation.

Figure 3-8 Writer List Screen Example

Fields

Path

For display only. The NMMGR path for this screen. It

includes the name of the workstation whose virtual

writers you are conﬁguring.