SNA NRJE Node Managers Guide (30292-90007)

Chapter 3 41
SNA NRJE Configuration
Configuring SNA NRJE
Punch Banner Code
Required. The code the punch banner is in. Enter H
for Hollerith, or E for EBCDIC.
Default: H
Punch Banner Job Number Location
Required. The location in which the host job number
begins in a punch banner.
Range: 0 – 76 (integer)
Default: 0 (the beginning of the banner)
Joblog Data File
Required. The data file (in NRJE.SYS) containing
information about each job submitted. This file is
created by SNA NRJE and given the name specified
here when the workstation is activated for the first
time; after that, the file is appended to. This file name
must be unique for each workstation.
Joblog Key File
Required. The key file (in NRJE.SYS) used to access
the Joblog Data File. This file is created by SNA NRJE
and given the name specified here when the
workstation is activated for the first time; after that,
the file is appended to. This file name must be unique
for each workstation.
Host Standard Print Form Name
The default print form name for the workstation. This
must match the name of the form in the Peripheral
Data Information Record (PDIR) for output routed to
the standard form on a print device. To determine this,
see the SNA NRJE User/Programmer Reference
Manual.
Default: STD
Host Configuration:
• JES2: This must match the
&STDFORM global
parameter; see Table 3-3. Note that if you are using
JES2 version 1.3.6 (or later) or 2.1.5 (or later), the
&STDFORM parameter is different; use the migration
tables to determine the correct
&STDFORM . If
&STDFORM is not specified, enter STD here.