SNA NRJE Node Managers Guide (30292-90007)

244 AppendixA
Result Codes and Messages
SNA NRJE Logging Messages
9077 MESSAGE: REQUIRED PARAMETERS NOT PASSED TO
RELEASEPRINTER (LU=9077)
CAUSE: Internal software error.
ACTION:
9078 MESSAGE: REQUIRED PARAMETERS NOT PASSED TO
RELEASEPUNCH (LU=9078)
CAUSE: Internal software error.
ACTION:
9079 MESSAGE: NRJE(!:!): FAILED TO OPEN OUTPUT FILE ON REMOTE
NODE: OUTPUT FILE NAME = ‘!’ HOST JOBNUMBER = !. OUTPUT
ROUTED TO DEFAULT DESTINATION, OUTPUT PRIORITY = 2.
(LU=9079)
CAUSE: A remote environment ID was specified in the Joblog entry
which was appended to the output file name by the NRJE LU. The
FOPEN of this file failed.
ACTION: Refer to the message logged immediately following this one to
identify the nature of the failure. If the NS connection to the remote
system has been lost then terminate and restart the workstation.
Contact the affected user.
9080 MESSAGE: NRJE(!:!): FAILED TO READ FROM NRJE XDS (XDS=!)
(LU=9080)
CAUSE: Occurs only while communicating with a JES3 host. NRJE was
attempting to obtain information about Joblog records in the Joblog
XDS by reading from the NRJE XDS. Internal software error.
ACTION: Contact Hewlett-Packard.
9081 MESSAGE: NRJE(!:!): DMOVIN INTRINSIC ERROR (LU=9081
CAUSE: Access error on the Joblog buffer XDS. Internal software error.
ACTION: Contact Hewlett-Packard.
9082 MESSAGE: NRJE(!:!): FAILED TO RELEASE A WRITER WHILE
PROCESSING A CANCEL REQUEST. SENSE CODE RETURNED TO
HOST=!. (LU=9082)
CAUSE: NRJE could not close a non-spooled output file while
attempting to process a cancel request. NRJE returned the indicated
sense code to the host.
ACTION: Refer to the message logged immediately prior to this one to
identify the nature of the failure.