SNA NRJE Node Managers Guide (30292-90007)

236 AppendixA
Result Codes and Messages
SNA NRJE Logging Messages
9028 MESSAGE: NRJE(!:!): FAILED TO WRITE TO NRJE XDS (XDS=!)
(LU=9028)
CAUSE: Error encountered in NXDSWRITENL while attempting to store
the LU’s PIN in the XDS to reserve a reader.
ACTION: Contact Hewlett-Packard.
9029 MESSAGE: NRJE(!:!): FAILED TO OPEN BANNER FILE (FSERR=!)
(LU=9029)
CAUSE: FOPEN failed while attempting to open the internal banner file
(used to save host banners until banner decode succeeds).
ACTION: The preceding error message will indicate the nature of the file
system error. The LU name is used as the file name of the banner file.
Ensure that the LU name is a valid MPE file name.
9030 MESSAGE: NRJE(!:!): FAILED TO OPEN PUNCH OUTPUT FILE FOR
HOST JOB NAME ‘!’. SENSE CODE RETURNED TO HOST =!
(LU=9030)
CAUSE: The Output Destination identified in the NRJE
Configuration: Writer Data screen could not be opened. One or more
messages logged prior to this message identify the nature of the failure.
ACTION: Refer to the message(s) preceding this one to identify the
nature of the failure. Correcting the problem will usually require either
(1) reconfiguring the Writer Data screen, or (2) recovering lost disk
space.
9031 MESSAGE: NRJE(!:!): FAILED TO OPEN PRINT OUTPUT FILE FOR
HOST JOB NAME ‘!’. SENSE CODE RETURNED TO HOST =!
(LU=9031)
CAUSE: The Output Destination identified in the NRJE
Configuration: Writer Data screen could not be opened. One or more
messages logged prior to this message identify the nature of the failure.
ACTION: Refer to the message(s) preceding this one to identify the
nature of the failure. Correcting the problem will usually require either
(1) reconfiguring the Writer Data screen, or (2) recovering lost disk
space.
9032 MESSAGE: NRJE(!:!): FAILED TO READ FROM FORMID XDS
(LU=9032)
CAUSE: DMOVIN failure occurred while attempting to lookup a form
name in the FORMID XDS.
ACTION: Check NRJE versions. Contact Hewlett-Packard.