SNA NRJE Node Managers Guide (30292-90007)

Appendix A 167
Result Codes and Messages
SNA NRJE Error Messages
271 MESSAGE: “,NEW” NOT VALID IN PRINT DESTINATION. (INT=271)
CAUSE: Output destination files must have been built before the job is
submitted.
ACTION: Build the output destination file and correct the file designator
and/or file equations.
272 MESSAGE: “,NEW” NOT VALID IN PUNCH DESTINATION. (INT=272)
CAUSE: Output destination files must have been built before the job is
submitted.
ACTION: Build the output destination file and correct the file designator
and/or file equations.
273 MESSAGE: “,NEW” NOT VALID IN FORMS DESTINATION. (INT=273)
CAUSE: Output destination files must have been built before the job is
submitted.
ACTION: Build the output destination file and correct the file designator
and/or file equations.
274 MESSAGE: UNABLE TO REWIND CONSOLE CMD TEMPORARY FILE.
INPUT FILE #!. (INT=274)
CAUSE: A file system related error. A file system error message follows
this message.
ACTION: Determine the cause by inspecting the file system error
message, and then correct the problem.
CAUSE: A severe error has occurred.
ACTION: See “Problem Resolution” in Chapter 5 , “SNA NRJE
Troubleshooting,” of this manual, and contact your HP representative
for assistance.
275 MESSAGE: UNABLE TO FCONTROL CONSOLE CMD TEMPORARY
FILE. INPUT FILE #!. (INT=275)
CAUSE: A file system related error. A file system error message follows
this message.
ACTION: Determine the cause by inspecting the file system error
message, and then correct the problem.
CAUSE: A severe error has occurred.
ACTION: See “Problem Resolution” in Chapter 5 , “SNA NRJE
Troubleshooting,” of this manual, and contact your HP representative
for assistance.