SNA NRJE Node Managers Guide (30292-90007)

Appendix A 147
Result Codes and Messages
SNA NRJE Error Messages
100 MESSAGE: CONSOLE COMMAND LENGTH IS NOT BETWEEN 1 AND
80 CHARS. (CON=100)
CAUSE: The length of the console command indicated in the
NRJESendCmd intrinsic call was negative or zero.
ACTION: Revise the length of the console command to a positive number
between 1 and 80 characters.
121 MESSAGE: INPUT CHAIN SIZE = !. IT MUST BE BETWEEN 0 AND !.
(INT=121)
CAUSE: First ! is the input chain size. Second ! is the upper limit.
ACTION: Input chain size with the range between 0 and second !.
122 MESSAGE: NUMBER OF LUS INPUT IS !. IT MUST BE BETWEEN 0
AND !. (INT=122)
CAUSE: First ! is the number of LUs input. Second ! is the upper limit.
ACTION: Input number of LUs with the range between 0 and second !.
123 MESSAGE: UNABLE TO STREAM MONITOR JOB. (INT=123)
CAUSE: NRJE unable to stream monitor job. The monitor job is a
streamable file residing under NRJE.SYS and has the same name as the
workstation name.
ACTION: Refer to the manual and create or update the monitor job so
that it is streamable.
124 MESSAGE: UNABLE TO OBTAIN NAMES OF MONITOR MESSAGE
FILES. (SEV=124)
CAUSE:
ACTION:
125 MESSAGE: UNABLE TO OPEN “TO MONITOR” MESSAGE FILE.
(SEV=125)
CAUSE:
ACTION:
126 MESSAGE: UNABLE TO SEND A MESSAGE TO THE MONITOR.
(SEV=126)
CAUSE:
ACTION:
128 MESSAGE: UNABLE TO OPEN “FROM MONITOR” MESSAGE FILE.
(SEV=128)
CAUSE:
ACTION: