SNA NRJE Node Managers Guide (30292-90007)

131
A Result Codes and Messages
This appendix contains messages and result codes that are unique to
SNA NRJE activity. These messages are described:
• Validation messages: These are messages that might occur when you
validate NRJE configuration data.
• NRJE error messages: These are written to $STDLIST.
Note that you also can obtain an online description of each message
by typing
:HELP nnnn
where nnnn is the error message number. For example, typing
:HELP 584
will display a description of NRJE error message 584 on your
terminal screen. Note that online help is available only for SNA
NRJE error messages.
• NRJE logging messages: These are written to the log destination
configured for your workstation in the Joblog Data File field on
the NRJE Configuration: Workstation Data Page 2 screen. These
messages are not written to $STDLIST. Online help is not available
for NRJE logging messages.
• Reverse NRJE messages: These are displayed on the host system
console, and are not displayed at the workstation.
Message parameters and suffixes are described below, before the error
message listings. “Problem Resolution,” in Chapter 5 , “SNA NRJE
Troubleshooting,” of this manual, can help you determine the kind of
information to gather when you encounter a problem.
Message Parameters
Parameters in messages are identified by ! characters. The parameters
can be numbers or alphanumeric strings.