SNA NRJE Node Managers Guide (30292-90007)

Chapter 6 113
Commands
RELEASE
RELEASE
Relinquishes access to the host remote console of a workstation.
Syntax
REL[EASE]
Description
Use this command to relinquish access to the host remote console of a
workstation. You must have NM capability or be an “allowed” console
user to use this command. You remain in the console of a workstation
until a RELEASE command is issued, or until you exit from the NRJE CI.
Note that since you cannot specify a
Wsid in this command, you can
release access to the default workstation only.
Text Reference
See CONSOLE earlier in this chapter for a general description of how to
use the host remote console. NRJERelease is the manager intrinsic
counterpart of this command; it is described in the SNA NRJE
User/Programmer Reference Manual.