SNA NRJE Node Managers Guide (30292-90007)

112 Chapter6
Commands
RDRUP
RDRUP
Enables the reader of an NRJE workstation.
Syntax
RDRU[P] [ Wsid ]
Parameter
Wsid The workstation name. This can be up to eight
alphanumeric characters long; the first character must
be alphabetic.
If you omit this parameter, the default workstation
identifier is used. You can specify a default workstation
identifier in the NRJE command.
Description
This command enables the reader of an NRJE workstation. Note that a
workstation’s reader does not have to be enabled before the workstation
can be started. When RDRDUP is executed successfully, NRJE users can
submit jobs.
This command has the same effect as the MPE console command OPENQ
ldev , where ldev is the logical device number of the NRJE workstation
reader. You can specify a particular workstation by specifying a
Wsid .
Text Reference
NRJERdrAccess is the manager intrinsic counterpart of this command;
it is described in the SNA NRJE User/Programmer Reference Manual.
Also see OPENQ in that manual.