SNA NRJE Node Managers Guide (30292-90007)

Chapter 6 103
Commands
CONSOLE
While you have access to the console, you receive all console messages
issued by the host. So, you can receive console messages in response to
your own commands, as well as messages in response to commands by
other users. You also receive all other output sent by the host to the
remote console. This includes host “Job Received” messages sent by
some host systems when a job is received from a remote workstation.
NRJE writes this output to your job or session output device,
$STDLIST.
Node Management Services can also log messages (CLAS0013 in
SUB0002) sent to the host remote console of your workstation. If no
user has access to the console, you can retrieve a lost message by using
the Node Management Services utility program NMDUMP. See the
SNA Link Services Reference Manual (for MPE V) or Using the Node
Management Services Utilities (for MPE XL) for more information
about this utility.
If you currently have access to the console and no longer need it, issue a
RELEASE command. That command terminates your access to the
console and frees that facility for use by other users.
Example
:NRJE RMT11 Enter the NRJE subsystem with RMT11 as the
default workstation.
ProductNum VersionNum NRJE (C) HEWLETT-PACKARD CO. CopyrightYear
WELCOME TO NRJE
RMT11> ... Execute subsystem commands.
RMT11>CONSOLE Acquire the console.
CON11> ... Execute other subsystem commands from the
configured console mode prompt.
CON11>$DA Issue a host remote console command, with the
configured host command prefix character.
Output messages related to this command might
not return immediately.
CON11> ... Execute subsystem commands.
CON11>RELEASE Relinquish ownership of the console.
RMT11> ... Remote workstation prompt is returned.