SNA Link/iX Node Managers Guide (30291-90009)

Table Of Contents

Chapter 2 33

SNA Node and Link Conﬁguration

HP 3000 Conﬁguration Overview

Once the IBM remote system is conﬁgured, you can conﬁgure the

HP 3000 system. Conﬁguration of the HP 3000 system is accomplished

through the Node Management Services conﬁguration manager

(NMMGR). The conﬁguration consists of the creation of a conﬁguration

ﬁle, using NMMGR.

Using NMMGR to conﬁgure SNA nodes and links is described later in

this chapter, and using it to conﬁgure logging (for SNA Transport as

well as for the SNA services) is described in Chapter 3 , “Logging

Conﬁguration.” Conﬁguring SNA services through NMMGR is

described in the Node Manager’s Guide for each service. The basic

operation of NMMGR is described in Using the Node Management

Services Utilities. If you are not familiar with NMMGR, read that

manual before you conﬁgure any parts of the HP 3000 system.