SNA Link/iX Node Managers Guide (30291-90009)
Table Of Contents
- 1 SNA Links Overview
- 2 SNA Node and Link Configuration
- 3 Logging Configuration
- 4 SNA Node Startup and Shutdown
- 5 SNA Link Troubleshooting
- 6 MPE Commands
- 7 SNA Link Installation Information
- A Messages
- SDLC Link Startup Error Messages
- SDLC Link Driver Error Messages
- SNACONTROL Error Messages
- SNA Transport Error Messages
- SNA Transport Logging Messages
- SDLC Link Shutdown Error Messages
- X.25 Link Failure Error Codes
- X.25 Link Module Configurator Error Codes
- X.25 Link QLLC Internal Error Codes
- NetView Alerts Error Messages
- Network Dump Manager Error Messages
- LAN Error Messages
- B Netview Alerts
268 AppendixA
Messages
LAN Error Messages
199 MESSAGE: Type 2 non-fatal software error.
CAUSE: A non-fatal Type 2 driver software error occurred.
ACTION: Disregard if the connection is working properly, and no other
errors occurred. If the connection will not function or other errors have
occurred, write down the error information and contact your
Hewlett-Packard support contact.
200 MESSAGE: Unable to send I/O Services message frame LINKNAME
CAUSE: A call to a system message send routine returned in error.
ACTION: Write down the error information displayed on the console,
submit an SR and call your Hewlett-Packard support contact.
201 MESSAGE: Unable to obtain a buffer manager buffer LINKNAME
CAUSE: Some other process has obtained buffers reserved for the driver.
ACTION: Write down the error information displayed on the console,
take a system dump, submit an SR and call your Hewlett-Packard
support contact.
202 MESSAGE: Unable to obtain a system timer LINKNAME
CAUSE: A call to obtain a timer resource returned an error.
ACTION: Take a system dump and call your Hewlett-Packard support
contact.
203 MESSAGE: Unable to release a system timer LINKNAME
CAUSE: The driver tried to free a timer that was not recognized by the
system as a valid timer.
ACTION: Take a system dump and call your Hewlett-Packard support
contact.
204–206 MESSAGE: Type 2 non-fatal software error.
CAUSE: A non-fatal Type 2 driver software error occurred.
ACTION: Disregard if the connection is working properly, and no other
errors occurred. If the connection will not function or other errors have
occurred, write down the error information and contact your
Hewlett-Packard support contact.
207 MESSAGE: Type 2 non-fatal protocol error.
CAUSE: An unexpected packet format was received.
ACTION: Disregard if the connection is working properly, and no other
errors occurred. If the connection will not function or other errors have
occurred, write down the error information and contact your
Hewlett-Packard support contact.