SNA Link/iX Node Managers Guide (30291-90009)
Table Of Contents
- 1 SNA Links Overview
- 2 SNA Node and Link Configuration
- 3 Logging Configuration
- 4 SNA Node Startup and Shutdown
- 5 SNA Link Troubleshooting
- 6 MPE Commands
- 7 SNA Link Installation Information
- A Messages
- SDLC Link Startup Error Messages
- SDLC Link Driver Error Messages
- SNACONTROL Error Messages
- SNA Transport Error Messages
- SNA Transport Logging Messages
- SDLC Link Shutdown Error Messages
- X.25 Link Failure Error Codes
- X.25 Link Module Configurator Error Codes
- X.25 Link QLLC Internal Error Codes
- NetView Alerts Error Messages
- Network Dump Manager Error Messages
- LAN Error Messages
- B Netview Alerts
244 AppendixA
Messages
X.25 Link QLLC Internal Error Codes
-27 through -49 MESSAGE: (reserved for internal use only)
CAUSE: An internal error has occurred.
ACTION: Call your Hewlett-Packard support contact.
-50 through -100 MESSAGE: INTERNAL ERROR
CAUSE: An internal error has occurred.
ACTION: Call your Hewlett-Packard support contact.