SNA Link/iX Node Managers Guide (30291-90009)
Table Of Contents
- 1 SNA Links Overview
- 2 SNA Node and Link Configuration
- 3 Logging Configuration
- 4 SNA Node Startup and Shutdown
- 5 SNA Link Troubleshooting
- 6 MPE Commands
- 7 SNA Link Installation Information
- A Messages
- SDLC Link Startup Error Messages
- SDLC Link Driver Error Messages
- SNACONTROL Error Messages
- SNA Transport Error Messages
- SNA Transport Logging Messages
- SDLC Link Shutdown Error Messages
- X.25 Link Failure Error Codes
- X.25 Link Module Configurator Error Codes
- X.25 Link QLLC Internal Error Codes
- NetView Alerts Error Messages
- Network Dump Manager Error Messages
- LAN Error Messages
- B Netview Alerts
238 AppendixA
Messages
X.25 Link Failure Error Codes
-83 MESSAGE: UNEXPECTED QDC
CAUSE: The remote system has sent an unsolicited Q disconnect (QDC).
ACTION: Restart the SNA node. If the problem still occurs, call your
Hewlett-Packard support contact.
-84 MESSAGE: UNEXPECTED QSM
CAUSE: The remote system has sent a QSM after the SNA connection
has already been established.
ACTION: Since this is a recoverable link error, the SNA node will be
revived. So, no action is necessary.