SNA Link/iX Node Managers Guide (30291-90009)
Table Of Contents
- 1 SNA Links Overview
- 2 SNA Node and Link Configuration
- 3 Logging Configuration
- 4 SNA Node Startup and Shutdown
- 5 SNA Link Troubleshooting
- 6 MPE Commands
- 7 SNA Link Installation Information
- A Messages
- SDLC Link Startup Error Messages
- SDLC Link Driver Error Messages
- SNACONTROL Error Messages
- SNA Transport Error Messages
- SNA Transport Logging Messages
- SDLC Link Shutdown Error Messages
- X.25 Link Failure Error Codes
- X.25 Link Module Configurator Error Codes
- X.25 Link QLLC Internal Error Codes
- NetView Alerts Error Messages
- Network Dump Manager Error Messages
- LAN Error Messages
- B Netview Alerts

Appendix A 231
Messages
SNA Transport Logging Messages
MESSAGE: Session terminated on node
NodeName
CAUSE: The indicated session received and processed a DeACTivate
Physical Unit (DACTPU), DeACTivate Logical Unit (DACTLU), or
UNBIND, as applicable.
ACTION: None; this is a normal event.
MESSAGE: Shutdown type = Internal error
CAUSE: This is part of the logging messages “Node
NodeName
all
sessions closed — beginning shutdown” and “Node
NodeName
shut down
completed” (each message is described earlier in this listing). This
message indicates the type of shutdown (caused by an internal error)
that is in progress.
ACTION: None.
MESSAGE: Shutdown type = Kill
CAUSE: This is part of the logging messages “Node
NodeName
all
sessions closed — beginning shutdown” and “Node
NodeName
shut down
completed” (each message is described earlier in this listing). This
message indicates the type of shutdown (kill) that is in progress.
ACTION: None.
MESSAGE: Shutdown type = Link failure norecovery
CAUSE: This is part of the logging messages “Node
NodeName
all
sessions closed — beginning shutdown” and “Node
NodeName
shut down
completed” (each message is described earlier in this listing). This
message indicates the type of shutdown (caused by a nonrecoverable
link failure) that is in progress.
ACTION: None.
MESSAGE: Shutdown type = Link failure recovery
CAUSE: This is part of the logging messages “Node
NodeName
all
sessions closed — beginning shutdown” and “Node
NodeName
shut down
completed” (each message is described earlier in this listing). This
message indicates the type of shutdown (caused by a recoverable link
failure) that is in progress.
ACTION: None.
MESSAGE: Shutdown type = Protocol
CAUSE: This is part of the logging messages “Node
NodeName
all
sessions closed — beginning shutdown” and “Node
NodeName
shut down
completed” (each message is described earlier in this listing). This
message indicates the type of shutdown (protocol) that is in progress.
ACTION: None.