SNA Link/iX Node Managers Guide (30291-90009)
Table Of Contents
- 1 SNA Links Overview
- 2 SNA Node and Link Configuration
- 3 Logging Configuration
- 4 SNA Node Startup and Shutdown
- 5 SNA Link Troubleshooting
- 6 MPE Commands
- 7 SNA Link Installation Information
- A Messages
- SDLC Link Startup Error Messages
- SDLC Link Driver Error Messages
- SNACONTROL Error Messages
- SNA Transport Error Messages
- SNA Transport Logging Messages
- SDLC Link Shutdown Error Messages
- X.25 Link Failure Error Codes
- X.25 Link Module Configurator Error Codes
- X.25 Link QLLC Internal Error Codes
- NetView Alerts Error Messages
- Network Dump Manager Error Messages
- LAN Error Messages
- B Netview Alerts
Chapter 6 157
MPE Commands
SNACONTROL STATUS
• PEND_SON = Pending session outage notification. A Session Outage
Notification (SON) deactivation request has been generated
internally or received on the link. However, no response has been
sent.
• RESET = The initial state. No sessions exist.
The user is the name of the user or program that owns the session.
The trace file is the name of the trace file, if tracing has been turned on.
If tracing is off, OFF is displayed.