SNA IMF/XL Node Manager's Guide (30293-90010)

Chapter 5 47

SNA IMF Troubleshooting

Problem Resolution

• Save copies of all active or in-use log ﬁles for analysis by your

HP representative.

• Record all intrinsic result codes and Pass Thru messages that

appear at an emulated terminal or printer and the HP 3000 console.

• Always obtain a copy of the host system generation you are using.

For the host conﬁguration to be compatible with SNA IMF,

Hewlett-Packard sets certain operands and parameters to required

values (see Chapter 3 , “SNA IMF Conﬁguration,” of this manual).

Also see the SNA Link/XL Node Manager’s Guide for more host

conﬁguration information. Note any differences between the actual

system generation and your expectations. Keep this information for

your HP representative. This is very important.

• Give a copy of NMCONFIG.PUB.SYS to your HP representative.

• Issue the SNACONTROL STATUS command (see the SNA Link/XL

Node Manager’s Guide for a description of the command).

SNA Transport Information

For problems that might involve SNA Transport, see the SNA Link/XL

Node Manager’s Guide.

Communications Link Information

For problems that might involve the communications link, see the SNA

Link/XL Node Manager’s Guide.