SNA IMF/XL Node Manager's Guide (30293-90010)

30 Chapter3
SNA IMF Configuration
Configuring SNA IMF
Program List Data Screen
Once you have configured the LUs for the security class, you can
configure the programs you want to be authorized to use the LUs. You
configure authorized programs on the SNA IMF Configuration:
Program List Data screen as shown in Figure 3-7. Note that if security
is not going to be used, you do not need to access this screen: All
programs will be authorized for this class (the @.@.@ default value will
be added automatically to the configuration file). Select this screen by
pressing
[f2] (Go To PGMLIST) on the SNA IMF Configuration: Security
Class Data screen. (You can go directly to this screen from any screen
by typing @IMF.
nodename.classname.PGMLIST in the command
window and pressing
[ENTER].)
Figure 3-7 Program List Data Screen
Fields
Path For display only. The NMMGR path for this screen. It
includes the names of the SNA node and the security
class you are configuring.
Programs A list of up to 26 programs to be authorized to use the
LUs in the security class. Each name must be a valid
MPE file name (no lockwords), and cannot be more than
26 characters long; MPE wildcard characters can be
used.
Note that a security class can be used only if the users
and the programs are authorized. A user is authorized
on the SNA IMF Configuration: User List Data screen.