SNA IMF/XL Node Manager's Guide (30293-90010)

28 Chapter3
SNA IMF Configuration
Configuring SNA IMF
Host Configuration: For troubleshooting purposes,
we strongly recommend that the LU names entered
here match the
luname operands of the LU macro that
defines these LUs in VTAM on the host; see Table 3-1.
If you use SNA IMF to communicate with an IBM
AS/400, we strongly recommend that the LU names
entered here match the names of the Device
Descriptions on the AS/400; see Table 3-2.
File
For display only. The name of the configuration file.
Once you have entered all of the LU names, press
[f6]
(Save Data). After the information is processed, press
[f1] (Go To USERLIST) if you need to configure
authorized users for this security class; press
[f2]
(Go To PGMLIST) if you need to configure authorized
programs for this security class; or press
[f8]
(Prior Screen) until you get to the NMMGR menu
screen or select screen you need next.
User List Data Screen
Once you have configured the LUs for the security class, you can
configure the users you want to be authorized to use the LUs. You
configure authorized users on the SNA IMF Configuration: User List
Data screen as shown in Figure 3-6. Note that if security is not going to
be used, you do not need to access this screen: All users will be
authorized for this class (the @.@ default value will be added
automatically to the configuration file). Select this screen by pressing
[f1] (Go To USERLIST) on the SNA IMF Configuration: Security Class
Data screen. (You can go directly to this screen from any screen by
typing @IMF.
nodename.classname.USERLIST in the command window
and pressing
[ENTER].)