SNA IMF/XL Node Manager's Guide (30293-90010)

Chapter 3 27
SNA IMF Configuration
Configuring SNA IMF
Security Class Data Screen
After you have selected a security class, NMMGR displays the SNA
IMF Configuration: Security Class Data screen as shown in Figure 3-5.
You can go directly to this screen from any screen by typing
@IMF.
nodename.classname in the command window and pressing
[ENTER]. Here you specify the LUs that belong to the security class you
selected earlier. Note that each LU is identified by its configured LU
Name instead of its NAU number.
Figure 3-5 Security Class Data Screen
Fields
Path
For display only. The NMMGR path for this screen. It
includes the names of the SNA node and the security
class you are configuring.
LU List for this Security Class
A list of up to 64 LUs that are to belong to the security
class you are configuring. Each LU is listed by its
configured LU Name, not its NAU number (LUs are
configured on the SNANode Configuration: LU Data
screen). This is checked when the validation is done.
Validating the configuration file is discussed earlier in
this chapter.
You can configure a total of 64 LUs per security class.
You can configure a total of 256 LUs per SNA node.