SNA IMF/XL Node Manager's Guide (30293-90010)

26 Chapter3
SNA IMF Configuration
Configuring SNA IMF
Figure 3-4 Security Classes Screen
Fields
Path For display only. The NMMGR path for this screen. It
includes the name of the node you are configuring the
security class for.
Class Name The name of the new security class you are configuring,
or the existing class whose configuration you are
modifying. The name can be up to eight alphanumeric
characters long; the first character must be alphabetic.
New Name The new name of an existing security class. The name
can be up to eight alphanumeric characters long; the
first character must be alphabetic.
Once you have entered the new name, press
[f4]
[Rename]; the class is then renamed.
Configured Security Classes (Under Node) For display only.
The names of the security classes that have been
configured for the SNA node you selected earlier. A
maximum 256 security classes can be configured (use
[f5] [Next Page] to display more fields).
File For display only. The name of the configuration file.
Once you have entered the class configuration
information, press [f5] (Add) if this is a new
configuration, or press
[f6] (Modify) if you are
modifying a configuration. This places you at the
SNA IMF Configuration: Security Class Data screen.