NS3000/iX Operations and Maintenance Reference Manual (36922-90039)

96 Chapter6
Using NETTOOL
Using the NETTOOL Tools
item Use to select a particular item from the one-line display
so that you can obtain detailed information on that
item.
refresh Use to set the number of times the program will display
resource usage before returning control to you. Default
is one cycle. (
[CONTROL]-Y will also return control.)
type Use to select which resource types the program will
display in the one-line (non-verbose) mode. Default is to
display all resource types.
used Use to suppress display of entries that are currently
unused. Default is to display resources regardless of
usage.
delay Use to select the interval (in seconds) between displays
of resource usage. Use this option in conjunction with
refresh in order to monitor the activity of resource
usage. Default is a delay of 1 second.
To Use SOCKINFO
The SOCKINFO tool displays sockets information.
1. Run NETTOOL by entering the program name at the MPE prompt:
NETTOOL.NET.SYS
The root menu will appear.
2. Select the SOCKINFO tool from the main menu by entering the
following SOCKINFO syntax:
SOCKINFO [filter][,pin]
filter program name in the form: file.group.account;
or user name in the form: user.account.
pin display for the specified PIN instead of starting out
in Global Display.
3. If filters are not used, SOCKINFO will print a Global Display like the
following:
GLOBAL DISPLAY Host=sampsys Gsxds=$a.d5690000 10:30 am
Pin User Program Job Pri Skts
-------------------------------------------------------------------------
59 (system process) snmp.net.sys cq152 2
61 (system process) sockreg.net.sys lq149 1
63 (system process) dsdad.net.sys lq149 14
69 joe.mpe vtserver.net.sys s538 lq100 1
70 bob.mpeix vtserver.net.sys s546 lq100 1