NS3000/iX Operations and Maintenance Reference Manual (36922-90039)

Chapter 6 91
Using NETTOOL
Using the NETTOOL Tools
GATELIST ???????
GATE UP ??????
GATE DOWN ??????
STATISTICS ??????
TOTALS Select to display total number of
routings.
filters Select to see current filter settings for
this menu. Also displays the global
settings (INFILE, OUTFILE, messages
flag, data flag, and menus flag).
networkfilter Select to set the networkfilter.
Enter a single IP address or @ for all.
Enter the IP address as four positive
integers between 0 and 255 separated
by periods (for example,
15.123.44.98).
gatewayfilter Select to set the gatewayfilter.
Enter a single gateway IP address or @
for all. Enter the IP address as four
positive integers between 0 and 255
separated by periods (for example,
15.123.44.98).
PATH Select to obtain information about the different
addresses or names used at different layers in order to
access a remote destination. You will be prompted to
specify the type of information you need. Enter NAME or
ADDRESS as desired.
NAME Select to display addresses at different
levels.
ADDRESS Select IP address to get corresponding
path information for that IP address.
filters Select to see current global filter
settings. Displays the settings of
INFILE, OUTFILE, messages flag, data
flag, and menus flag.
To Use NMDUMP
NMDUMP is one of the node management services (NMS) utilities. You
use this tool to decode and format log records or trace messages so that
they can be more easily read and analyzed.