NS3000/iX Operations and Maintenance Reference Manual (36922-90039)

Appendix A 193
LINKCONTROL Command
NS 3000/iX FDDI Link Statistics
Receive errors. The number of all error frames that were detected by
this station and no previous station.
Receives lost. The number of frames received that had an error.
Receives not copied. The number of frames addressed to this station
but not copied into a receive buffer because there was no room for them.
Receives discarded. The number of frames received by this station
that were discarded due to errors, invalid addresses, or lack of
resources.
ALL Parameter Fields
The ALL parameter for FDDI links displays a combination of all fields
presented by the LINKSTATE, CONFIGURATION, and STATISTICS
commands. Please reference the previous sections for descriptions of
the various fields.
DIAGNOSTIC Parameter Fields
The DIAGNOSTIC parameter for FDDI links displays all fields
presented by the ALL parameter plus several additional fields that
might be useful for HP representatives trying to debug FDDI link
related problems. Brief descriptions will be given here; however, please
note that some descriptions will be meaningful only to HP factory
representatives. Figure A-14 provides an example of the additional
fields displayed by this command.
Figure A-14 FDDI DIAGNOSTICS Parameter Fields
Writes completed. The number of data packets successfully sent from
the driver to the FDDI card. The maximum value is two billion (2^31).
Reads completed. The number of packets received from the FDDI
card by the driver. The maximum value is two billion (2^31).
Writes completed 0 Reads completed 0
Write bytes 0 Read bytes 0
Unicast writes 0 Unicast reads 0
Multicast writes 0 Multicast reads 0
Broadcast writes 0 Broadcast reads 0
Writes aborted 0 Reads aborted 0
Outbound high water 0 Non-routable reads 0
Num of heartbeats 3494 Subset buffer reqs 1
Number of users 1 Num of subset bufs 62
Num of power fails 0 Queued buffer reqs 0
Ring up time 3494 Read buffs in pool 63
Ring drops 0 Read buffs avail 49
Loquix reinits 0 Read buffer size 5312
SMT events 8
Lan_in_active ON
Configured ON
Ring_op ON
Reserved 1 0 Reserved 2 0
Reserved 3 0 Reserved 4 0