NS3000/iX Operations and Maintenance Reference Manual (36922-90039)

158 Chapter7
Commands
NSCONTROL START
Example 1
Example 1 shows the command sequence necessary to start the
Network Services. Enter the NETCONTROL START command to initiate
the network transport before the NSCONTROL START command, as
shown in the example. Issuing the NSCONTROL START creates the
DSDAD process and starts all the user services.
To successfully initialize a node, the commands must be issued in the
order specified. At least one of the required NETCONTROL START
commands must be issued first, before the NSCONTROL START
command.
:NETCONTROL START;NET=LAN1
:NSCONTROL START
Example 2
For security reasons, the node manager for this node has decided to
restrict the Network Services to outgoing only. The command shown in
example 2 enables users on the local node to use resources on remote
nodes. The reverse is not true. Users on remote nodes are not allowed to
logon or use any of the services on the local node. The status display
shows all the local services enabled and all the remote services
disabled.
:NSCONTROL START=VTL,VTRL,NFTL,RFAL,RPML
VTL NETWORK SERVICE STARTED.
VTRL NETWORK SERVICE STARTED.
NFTL NETWORK SERVICE STARTED.
RFAL NETWORK SERVICE STARTED.
RPML NETWORK SERVICE STARTED.
:NSCONTROL STATUS=SERVICES
SERVICE TYPE STARTED SERVER DESCRIPTION
VTA REMOTE NO VTSERVER INCOMING STREAM MODE VIRTUAL TERMINAL
NSSTATL LOCAL NO NSSTATUS OUTGOING NSSTATUS SERVICE
NSSTAT REMOTE NO NSSTATUS INCOMING NSSTATUS SERVICE
LOOPBACK REMOTE NO LOOPBACK INCOMING LOOPBACK SERVICE
RPML LOCAL YES DSSERVER OUTGOING REMOTE PROCESS MANAGEMENT
RPM REMOTE NO DSSERVER INCOMING REMOTE PROCESS MANAGEMENT
PTOPL LOCAL NO DSSERVER OUTGOING PROGRAM-TO-PROGRAM COMMUNICATION
PTOP REMOTE NO DSSERVER INCOMING PROGRAM-TO-PROGRAM COMMUNICATION
RFAL LOCAL YES DSSERVER OUTGOING REMOTE FILE ACCESS
RFA REMOTE NO RASERVER INCOMING REMOTE FILE ACCESS
NFTL LOCAL YES NFT OUTGOING NETWORK FILE TRANSFER
NFT REMOTE NO NFT INCOMING NETWORK FILE TRANSFER
VTRL LOCAL YES VTSERVER OUTGOING REVERSE VIRTUAL TERMINAL
VTR REMOTE NO VTSERVER INCOMING REVERSE VIRTUAL TERMINAL
VTL LOCAL YES VTSERVER OUTGOING VIRTUAL TERMINAL
VT REMOTE NO VTSERVER INCOMING VIRTUAL TERMINAL