NS3000/iX Operations and Maintenance Reference Manual (36922-90039)

152 Chapter7
Commands
NSCONTROL SERVER
NSCONTROL SERVER
Alters the characteristics of the Network Services server processes.
Syntax
{servername}
NSCONTROL SERVER= {ALL }[,minservers][,maxservers]
Parameters
SERVER Dynamically alters the minimum or maximum number
of servers.
serverName Specifies the type of server for which you want to alter
the available number of server processes. The servers
that control the network services are:
DSSERVER The specified options apply to the
server that controls RFA, RDBA, PTOP,
and RPM. Default minserver, maxserver
values are 0, 300 respectively.
LOOPBACK The specified options apply to the
server used by the LOOPBACK services.
Default minserver, maxserver values
are 0, 300 respectively.
NFT The specified options apply to the
server that controls NFT. Default
minserver, maxserver values are 0, 300
respectively.
NSSTATUS The specified options apply to the
server that controls NSSTAT (and
NSTATL) services. Default minserver,
maxserver values are 0, 300
respectively.
VTSERVER The specified options apply to the
server that controls VT and REVERSE
VT. Default minserver, maxserver
values are 0, 300 respectively.
ALL If you specify ALL in place of a servername, the
specified options apply to all servers (NFT, DSSERVER,
LOOPBACK, NSSTATUS, VTSERVER).
Default: ALL