NS3000/iX Error Messages Reference Manual (36923-90041)

Chapter 4 49
NFT/3000 Error Messages
MESSAGE: ! IS INVALID DELIMITER BETWEEN TARGET AND
KEYWORDS.
13 CAUSE: Usually a typographical error.
ACTION: Retype and reissue the command.
MESSAGE: UNKNOWN KEYWORD: !
14 CAUSE: Usually a typographical error.
ACTION: Retype and reissue the command.
MESSAGE: REMOTE ENVIRONMENT SPECIFIED BY USER DOES NOT
EXIST.
15 CAUSE: The session associated with the specified node or environment
cannot be found. Either the session was aborted externally or an
internal error occurred.
ACTION: Ask your system manager if your session was aborted. If not,
check the NM log file for additional error information.
MESSAGE: RESTART ID FILE NAME IS TOO LONG.
16 CAUSE: Restart ID file name exceeds the length of a legal MPE file
name.
ACTION: Correct the file name and re-enter the command.
MESSAGE: INVALID FILE SIZE.
19 CAUSE: FSIZE specified contains non-numeric characters or is too
large.
ACTION: Retype and reissue the command with the correct FSIZE.
MESSAGE: INVALID CHECKPOINT INTERVAL.
20 CAUSE: Checkpoint interval specified contains non-numeric characters
or is too large.
ACTION: Retype and reissue the command with the correct checkpoint
interval.
MESSAGE: FILE IS TOO LONG.
22 CAUSE: Usually a typographical error.
ACTION: Retype and reissue the command.
MESSAGE: MISSING RIGHT BRACKET IN LOG-ON SPECIFICATION.
23 CAUSE: Typographical error.
ACTION: Retype and reissue the command.