NS3000/iX Error Messages Reference Manual (36923-90041)

450 Chapter19
Logging Location Codes
NETIPC Logging Location Codes
MESSAGE: Internal
14 CLAS0000 CAUSE: Unable to release timer.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: Internal error.
16 CLAS0000 CAUSE: Unable to create port message pool.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: Internal error.
17 CLAS0000 CAUSE: Call hpgetsysplabel failed.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: Internal error.
18 CLAS0000 CAUSE: Call to convert_dst failed.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: Internal error.
19 CLAS0000 CAUSE: Unable to alter port subqueue state.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: Internal error.
20 CLAS0000 CAUSE: Failure in the call to NWTM procedure.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: Internal error.
21 CLAS0000 CAUSE: Unable to get the pointer to file system data structure.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: Internal error.
22 CLAS0000 CAUSE: Unable to set timer interval.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: Internal error.
23 CLAS0000 CAUSE: Error in creating LSI.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: Internal error.
24 CLAS0000 CAUSE: Unable to allocate a LSI.
ACTION: See Appendix A, “Submitting an SR,” of this manual.
MESSAGE: Internal error.
25 CLAS0000 CAUSE: Unable to allocate socket record.