NS3000/iX Error Messages Reference Manual (36923-90041)

Chapter 14 141
VALERR and VALWARN Messages
MESSAGE: NO STORE AND FORWARD BUFFERS CONFIGURED.
1004 CAUSE:
1. The specified router network has more than one link configured, but
no store and forward buffers have been configured in the
NETXPORT.NI.NIname.PROTOCOL.IP screen. It will not be possible
to send inbound packets from one link out to another link without
any store and forward buffers.
2. If this condition is not desired, use the NMMGR utility to configure
store and forward buffers in the
NETXPORT.NI.NIname.PROTOCOL.IP screen, and validate the
Network Transport again.
ACTION:
1. More than one non-loopback network is configured, but no store and
forward buffers have been configured in the
NETXPORT.NI.NIname.PROTOCOL.IP screen. It will not be possible
to send inbound packets from another network out on a link on this
network without any store and forward buffers.
2. If this condition is not desired, use the NMMGR utility to configure
store and forward buffers in the
NETXPORT.NI.NIname.PROTOCOL.IP screen, and validate the
Network Transport again.
MESSAGE: CONFIGURED T1 PARAMETER (!) IS THE
RECOMMENDED FORMULA VALUE (!).
1007 CAUSE: The T1 timer parameter configured is less than the value
recommended in the LAP-B specification for the type of point to point
link configured in LINK.linkname.
ACTION: Confirm that the configuration in this LINK.linkname is
correct. If any changes are made, validate the Network Transport
again.
MESSAGE: NETWORK DIRECTORY CONFIGURED BUT NOT FOUND.
1100 CAUSE: The network directory is configured as part of the search path
in the NETXPORT.GLOBAL screen, but no NSDIR.NET.SYS file exists.
ACTION: Prior to completing the current configuration activity, the
network directory NSDIR.NET.SYS should be created, or the search
path in the NETXPORT.GLOBAL screen should be modified to not include
the network directory.
MESSAGE: ANOTHER LAP-B LINK HAS THIS SAME PHYSICAL PATH.
1101 CAUSE: Another LAP-B link in the configuration file is configured for
the same physical path as the specified LAP-B link.