NetBase for MPE Reference Guide

Using CONFIG
3-7
Operational Parameters
The following parameters define general information regarding the operation of NetBase:
GLOBAL - Local Node Number
An arbitrary number between 1 and 255 designating the number of this node. Each node in the
NetBase network must be assigned a different node number. This value is used to determine which
files are local and which are remote. This parameter takes effect when NetBase is started.
Default = 1
Maximum = 255
GLOBAL - Error Enhancements
A string specifying the type of display enhancements that will be used when sending a fatal
NetBase error to the console. The string may consist of the word NONE or one or more of the
following characters:
Character Description
H
Half bright
I
Inverse video
U
Underline
B
Blinking
R
Ring the bell when printing the message
If the string consists of the word NONE, error messages will be displayed with no display
enhancements. If the console on the local node is a non-HP terminal, only R will apply. This
parameter takes effect when new processes are started.
Default = IR