NetBase for MPE Reference Guide

Chapter 2
2-20
SECURITY
This command gives the user access to the NetBase security subsystem. Turn to the “NFA Security”
section in Chapter 6 for more information on the security subsystem. This command requires
SYSTEM MANAGER(SM) and NODE MANAGER(NM) capability.
Note. Since NBCTRL communicates directly with the NetBase controlling process, only
one person may execute it at a time. This should be considered when invoking the
security subsystem through NBCTRL. The security subsystem can be accessed directly by
running the program NBSECURE. It is recommended that NBSECURE be used whenever
extended security maintenance is required.
Syntax
∗> SECURITY
Parameters
This command does not have parameters.
Examples
To enter the security subsystem, issue a command and exit back to NetBase control:
∗> SECURITY
S> ALLOW @.@:1;ACCESS=R,W;@.@.PAYABLES
S> EXIT