NetBase for MPE Reference Guide

Appendix A
A-8
The following table lists the various installation options and when each is used.
Install Option Usage
INSTALL
Most installations.
INSTALL OMNIDEX
Required if using OMNIDEX 3.0 and NetBase NFA. If using this
option, there is an additional configuration step. Turn to Chapter
10 “NetBase and Third Party Products” for more information on
the OMNIDEX/NetBase interface.
INSTALL NOIMAGE
Used when installing NBSpool Plus only (without NetBase).
INSTALL NFS
Used when installing NFS Client only (without NetBase).
_____ 3.1 Run the NBINST installation program:
:HELLO MANAGER.SYS, PUB
:SETJCW NBDISABLE=FATAL
:RUN NBINST.PUB.NETBASE;INFO="INSTALL"
NetBase/NFS Auto-Install Program [x.x] Update n (C) QUEST Software 1996
Ready to install NetBase? Y
PHASE 1 - CHECK CURRENT INSTALLATION
PHASE 2 - CHECK SYSTEM SL STRUCTURE
PHASE 3 - SCAN SYSTEM SL
PHASE 4 - CREATE NETBASE SL
PHASE 5 - INSTALL NETBASE SYSTEM SEGMENTS
PHASE 6 - UPDATE SYSTEM SL
PHASE 7 - OCT THE NETBASE SL
PHASE 8 -OCT THE NETBASE SYSTEM SEGMENTS
PHASE 9 -INSTALL NATIVE MODE NETBASE
Now shutdown and retart the system
END OF PROGRAM
The above example shows a typical NBINST display. The actual number of steps or the
text of each step may vary from installation to installation.
_____ 3.2 After the successful completion of the NetBase installation program, the system must
be shut down and restarted.