NetBase for MPE Reference Guide

Using CONFIG
3-31
SHADOW - Transfer Single Queues
This parameter causes shadow EXPORT to transfer queued shadow data a queue file at a time. This
is useful for transferring queued shadow information across network links that are likely to
experience failures. This parameter takes effect when Exporting is started.
Default = N
SHADOW - Transfer ACK Frequency
This parameter enables acknowledgments during a shadow transfer. This feature should only be
used if communication problems occur frequently during transfers. The lower the value, the slower
the transfer will go. Try 4 at first, then raise or lower it if desired. A value of 0 disables this feature.
This parameter takes effect when Exporting is started.
Default = 0
Maximum = 256
SHADOW - Post Directory Filename
This parameter allows the posting process to use a different NetBase directory than other processes
on the system.
Default = (Whatever is specified under DIR - Default Directory Filename)