NetBase for MPE Reference Guide

Using CONFIG
3-21
SHADOW - Export Upshift Priority
This parameter is the MPE process priority that the export process will shift into should exporting
fall behind. The export process determines it has fallen behind when the number of records in the
export queue exceeds the upshift trigger. This parameter takes effect when the START EXPORT
command is issued in NBCTRL.
Default = CS
SHADOW - Export Upshift Trigger
When the number of records in the export queue exceeds this number, the export process will
automatically reschedule itself into the queue specified by the upshift priority. This parameter takes
effect when the START EXPORT command is issued in NBCTRL.
Default = 1500
SHADOW - Export Downshift Trigger
This parameter is used by NetBase when the export process is in the upshift queue due to having
exceeded the upshift trigger. When the number of records in the export queue falls below this
number, the export process will automatically reschedule itself into the queue specified by the
Export Initial Priority parameter. This value should be between 0 and the upshift trigger. The upshift
and downshift triggers should be set far enough apart to prevent constant priority shifting. This
parameter takes effect when the START EXPORT command is issued in NBCTRL.
Default = 100
SHADOW - Shift Check Interval
This parameter determines how often the export process should check the export queue to see if it is
backlogged. This parameter is specified in number of records. This parameter takes effect when the
START EXPORT command is issued in NBCTRL.
Default = 50
SHADOW - Disable Shift Messages
This disables the upshift and downshift messages that are normally generated by the EXPORT
process. This parameter takes effect when the START EXPORT command is issued in NBCTRL.
Default = N