NBSpool for MPE Reference Guide

Installation and Configuration
1-5
If spooling is active, issue an
ABORT SPOOLING command, or wait until spooling stops.
:RUN NBCTRL.PUB.NETBASE
*> ABORT SPOOLING
*> EXIT
5. Exit all users from NBSpool and VISTA Plus. Once all users are out, stop all NBSpool and
VISTA Plus background jobs.
6. Insert the NBSpool tape, restore the install job, and reply to any tape requests.
:HELLO MANAGER.SYS
:RESTORE;NBINSTAL.JOB.@;LOCAL
7. Add the passwords for
MANAGER.SYS to the !JOB command in the first record of the NBINSTAL
file.
8. If you are using VESOFT’s
STREAMX utility, do one of the following:
• Disable
STREAMX and use the MPE STREAM command.
• Modify the installation job and change each
STREAM command to STREAMX.
9. Stream the install job, type:
Note. If you have a lockword on
QUERY.PUB.SYS, remove it prior to streaming
NBINSTAL.
:STREAM NBINSTAL
10. Put the tape back online, and reply to the request when it comes up on the console.
11. Change the passwords on the
NETBASE account if desired.